Designer Polyester Acoustic Panels
Wall and ceiling acoustic panels for Cafes, Restaurants, Bars, School Classrooms, Gymnasiums, Halls, Home & Professional Studios and Offices.
Providing superb sound control and cool looks, these Designer Range panels are rigid and at 200 KG/M3 density have a superb finish and classy looks in
any setting. They have a low 24mm profile and are therefore ideal in rooms with a 2400mm height ceiling. Their rigidity also means they are ideal for
suspension e.g. over a meeting room table.
White Ceiling or Wall Panels
White polyester Acoustic panel (1200mm x 600mm x 24mm) - rigid with very classy "raw silk" finish. Therefore ideally suited to both wall panels and particularly
ceiling panels in cafes, bars, restaurants, schools, offices, studios and home theatres.
This is our most popular office panel.
Black Ceiling or Wall Panels
Black Polyester Acoustic panel (1200mm x 600mm x 24mm)- rigid with very classy "silk" finish. Therefore ideally suited to both wall panels and
ceiling panels in cafes, bars, restaurants, schools, offices, studios and home theatres. Very popular on black cafe ceilings
requiring a more casual "industrial" look. They look spectacular on natural wooden
ceilings. Also popular where dirt is a problem e.g. kitchen areas.
Grey Ceiling or Wall Panels
Grey polyester Acoustic panel (1200mm x 600mm x 24mm)- rigid with very classy 'raw silk" finish. Suitable for both walls and ceilings in cafes, bars,
restaurants, schools, offices, studios and home theatres.
- Bonded plastic Polyester fibre @ 200 Kgs per M3 density (black panels), @ 133 Kgs per M3 density (grey & white panels. No
irritation, eco friendly, washable, fade resistant, fireproof & 100% NZ building regulation compliant. Due to their rigid design they are the only acoustic
product that can be easily hung from ceilings without sagging or deformation.
- Ceiling & wall panels are w:600mm h:1200mm with square
- Ceiling & wall panels are 24mm thick.
- Black, White or Grey as shown above.
- 4 Panels per pack.
- A Rated - Non flamable.
- May be glued using contact adhesive (e.g. ADOS F2) or
hung/suspended using our new Suspension Kits. Suspending all our panels from the ceiling or
gaping them from the walls has a very significant effect on the sound absorption. The gap doubles the
sound absorbtion at bass and low mid frequencies. Please see graph below for results.
Full instructions, guidelines and options for fixing and placement are included in all packs.
Installation is easy and quick for any handy-person or builder.
- Ceilings and walls - 24mm panels.
School Classrooms, Cafes, &
(using 24mm thick suspended or direct glued ceiling panels) -
approximately 36% of the total ceiling area for most school classrooms and commercial
applications including restaurants, cafes, bars, offices and meeting rooms.
- placement is the key to successful recording and mixing studio acoustics. The three key areas are early reflection damping (primary sonic
reflections), corner bass frequency trapping and rear wall behind mixing position damping. Please see diagram below.
- similar requirements and placement to studios. The main difference is the side wall panel placement which is typically further back
in the room mid way between the speakers and listening position.
24mm = 0.75 (NRC = Noise reduction coeficient. A measure of
a panel's overall sound reduction/absorption ranging from 0=zero
to 1=100% absorption)
- No Gap
NRC performance by frequency
- 24mm ceiling and wall panels - 2.5kg.
Send us your room measurements and snaps of your walls and ceilings
and we'll send you back free recommendations for the quantity and
positioning of your acoustic panels.
E-mail us for prices & delivery: email@example.com